العربية Try the demo Start now
Home › BOQ items guide › External works and roads

External works and roads in the bill of quantities

5 categories and 12 items

What the division covers

This division covers what lies outside the building within the site boundary and the roads connected to it: pavements, interlocking paving and kerbstones; base courses, asphalt and road marking; landscaping with turf, trees and an irrigation network; and swimming pools and children’s play surfaces. It comes at the end of the project, after scaffolding is struck and buried service lines are complete, so it absorbs every earlier delay and the pressure of the handover date. It deserves care in pricing because its quantities are large and measured in square metres, and any small error in a layer thickness or in site levels repeats over the whole area.

Where it weighs most

The division weighs most in road projects, residential subdivisions, public parks, schools and residential and commercial compounds with large car parks. In villas it is usually limited to courtyards, paths, the garden and the pool, while asphalt yards and heavy-duty interlock dominate in warehouses and factories.

Paving

Paving covers the surfacing of paths, yards, car parks and building entrances and their surrounds. Interlocking concrete block is the most widely used because it can be lifted and relaid over buried service lines, and its thickness is chosen by load: pedestrians, cars or lorries. Kerbstones bound the pavement, restrain the edges of the paving and direct rainwater. Stamped concrete is a decorative cast-in-place alternative that suits courtyards and pool surrounds where a continuous surface with few joints is wanted.

Asphalt and roads

Asphalt and roads covers the layers of flexible pavement from the bottom up: the aggregate base course compacted over the prepared subgrade, then the asphalt binder and wearing courses with tack coats between them, then the line marking. Layer thicknesses follow traffic and subgrade strength: a single wearing course is enough for light car parks, while streets need a thicker base and two or more asphalt courses. Thermoplastic marking is used on roads, and cold paint in car parks and internal yards.

Landscaping

Landscaping brings together planting works and what serves them: lawns in natural or artificial turf, planting of trees, palms and shrubs, and the irrigation network that keeps them alive. Natural turf is chosen from heat- and salt-tolerant varieties and needs agricultural soil, watering and constant maintenance. Artificial turf is chosen where a green look with lower water use is wanted. Irrigation is designed as drip for trees and shrubs and sprinklers for lawns, fed from a dedicated tank and pump or from treated water.

Swimming pools

A concrete swimming pool is a water-retaining structure that gathers several trades into one item: excavation, the watertight reinforced concrete shell, waterproofing, mosaic or ceramic tiling, then filtration, circulation, disinfection and underwater lighting equipment. Designs differ between the simpler skimmer system common in villas and the perimeter overflow system with channel and balance tank required in public and hotel pools. The system sets both the concrete volume and the equipment, so the price differs clearly between the two.

Play and sports surfaces

Play and sports surfaces are resilient surfaces that protect children and players from the effect of falls. Poured-in-place rubber surfacing consists of a base layer of black rubber granules and a coloured top layer; it is laid without joints in free shapes and colours and is chosen for play areas in parks and schools. Ready-made rubber tiles are quicker to lay and easier to replace, and suit small areas and exercise rooms. Either way, thickness is set by the critical fall height of the equipment installed above.

Other divisions

Price your whole bill of quantities

Upload the bill of quantities and its items are priced from published references, each with its price source.

Start nowجرّب بلا تسجيل