Concrete swimming pool in the bill of quantities
| Unit | lump sum (or detailed items) |
|---|---|
| Category | Swimming pools |
| Division | External works and roads |
The item as worded in the bill
Supply and construct reinforced concrete swimming pool with skimmer system, internal size 4×8 m, depth graded from 1.2 to 1.8 m, in C35 watertight concrete with waterstops at construction joints; the rate includes excavation, waterproofing, mosaic tiling with pool-grade adhesive and grout, filtration, circulation and disinfection equipment, underwater lighting, ladder and a filling test.
Method of measurement
Measured as a lump sum for the complete pool as shown on the drawings. Where broken down, excavation and concrete are measured in cubic metres, reinforcement by the tonne, waterproofing and tiling in square metres of wetted surfaces including steps and benches, the coping in linear metres, and equipment as a set or by number. Walls are measured to full height to the coping, not to water level.
What the unit rate covers
- Excavation and backfilling around the shell
- Watertight reinforced concrete and waterstops
- Cast-in items: inlets, skimmers, main drain and light niches
- Waterproofing, render and tiling in pool-grade materials
- Filter, pump, control panel and circulation pipework
- Filling test, commissioning and first water balancing
Priced separately
- Pump room where billed as a structural item
- Dewatering and shoring of the excavation
- Power supply up to the pool panel
- Water heating or cooling and the pool cover
Specification and reference
The concrete shell is governed by the Saudi code SBC 304 and the requirements for liquid-retaining structures in ACI 350 on concrete cover and crack width control. Electrical work around the pool follows SBC 401 on extra-low voltage for lighting and equipotential bonding, and public pools comply with the municipality’s health requirements on water circulation and safety provisions.
What moves the rate
- Dimensions, depth and shape of the pool
- Circulation system (skimmer or perimeter overflow)
- Type and quality of tiling
- Groundwater level and soil conditions
Common pricing mistakes
- Pricing an overflow pool at the rate of a skimmer pool, leaving out the perimeter channel, the balance tank and their concrete and pipework.
- Calculating tiling from the water surface area instead of floor, walls, steps and benches, which come to about twice that area or more.
- Skipping the filling test before tiling, so a leak is found after finishing and waterproofing and tiling are redone at the contractor’s cost.
- Using ordinary adhesive and grout instead of those made for permanent immersion and pool chemicals, so mosaic pieces fall off within months.
A published price for its main material
The monthly Kingdom-wide average as published by the General Authority for Statistics, with its monthly series: 350 K Normal Concrete
Related calculators and terms
More items in Swimming pools
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل