Irrigation network in the bill of quantities
| Unit | lump sum (or lin. m for pipes and No. for equipment) |
|---|---|
| Category | Landscaping |
| Division | External works and roads |
The item as worded in the bill
Supply and install automatic irrigation network comprising uPVC main and lateral lines of the diameters shown, buried to the depths on the drawings, drip lines for trees, pop-up sprinklers for lawns, solenoid valves in valve boxes and a programmable controller; the rate includes trenching and backfilling, sand bedding, sleeves under paths, pressure testing and commissioning.
Method of measurement
In a detailed take-off, pipes are measured in linear metres per diameter without deducting fittings, drip lines in linear metres, sprinklers, bubblers, solenoid valves and their boxes by number, and the controller by number according to its stations. Trenching, backfilling and fittings are within the pipe rate. Where the item is a lump sum, the contractor is bound by everything on the drawing and equipment schedule.
What the unit rate covers
- Pipes, fittings and solvent cement
- Trenching, backfilling, sand bedding and warning tape
- Sprinklers, bubblers and drip emitters
- Solenoid valves, valve boxes and control cables
- Controller and its programming
- Pressure testing, flushing and adjusting coverage
Priced separately
- Tank, pump and main filter where separately billed
- Power supply to the controller and pump
- Cutting and reinstating existing paving
- Water connection from the public source
Specification and reference
Governed by the project specification and municipality requirements for public gardens, and by the plumbing code SBC 701 for backflow protection of the potable supply where it feeds the network. Treated-water pipes carry their designated colour, the network is hydraulically designed so that pressures at the farthest and nearest outlets are close, and it is pressure tested before backfilling.
What moves the rate
- Site area and planting density
- Irrigation type (drip or sprinklers) and number of stations
- Soil type and difficulty of trenching
- Water source, its quality and need for filtration
Common pricing mistakes
- Pricing the lump sum from the gross garden area without taking off drip line lengths, which multiply in dense shrub beds.
- Leaving out sleeves under pavements and roads, then breaking up new paving to pass the pipes at the contractor’s cost.
- Forgetting control cables from the controller to each solenoid valve, whose lengths approach those of the main lines.
- Assuming adequate pressure from the source without checking, so an unpriced booster pump proves necessary at commissioning.
Related calculators and terms
More items in Landscaping
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل