Asphalt paving courses in the bill of quantities
| Unit | m² (or tonne) |
|---|---|
| Category | Asphalt and roads |
| Division | External works and roads |
The item as worded in the bill
Supply, lay and compact hot-mix asphalt wearing course 5 cm thick after compaction, with 60/70 penetration grade bitumen and an approved Marshall-designed mix, laid by mechanical paver and compacted with steel and pneumatic rollers; the rate includes tack coat, cleaning the surface, longitudinal and transverse joints, and core samples.
Method of measurement
Measured in square metres for each course at its stated compacted thickness, over the area laid within the limits of the approved section. Islands and planters are deducted; manhole covers are not. Excess thickness is not paid, and a shortfall proven by cores is dealt with under the specification. Where measured by the tonne, weighbridge tickets for material actually laid are used, within the theoretical thickness.
What the unit rate covers
- Hot-mix asphalt and its haulage
- Laying by paver and compaction by rollers
- Tack coat where the item states it
- Cleaning the surface before laying
- Forming joints and trimming edges
- Mix design, core samples and testing
Priced separately
- Aggregate base course
- Bituminous prime coat where separately billed
- Milling of old asphalt
- Road marking and symbols
Specification and reference
Governed by the Saudi Highway Code and the general specifications for road and bridge construction, and by municipality standards for local streets. The job mix is approved on a laboratory design fixing grading, bitumen content, stability and air voids; mix temperature is monitored at laying and rolling, and thickness and compaction are verified by cores at an approved laboratory.
What moves the rate
- Course thickness and type (binder or wearing)
- Distance from the asphalt plant to the site
- Total area and interruptions to the work
- Movement in bitumen price at the time of laying
Common pricing mistakes
- Converting area to tonnes at a low assumed density, when compacted mix weighs about 2.3 to 2.4 tonnes per cubic metre.
- Adding no margin for regulating undulations in the base surface, so the paver uses more mix than the theoretical thickness.
- Leaving out tack coat and compressed-air cleaning of the surface, although both are in the item description, not a separate item.
- Pricing small scattered patches at the rate for large yards, although moving the paver and rollers to each one raises the cost.
Related calculators and terms
More items in Asphalt and roads
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل