العربية Try the demo Start now
Home › BOQ items guide › Waterproofing and thermal insulation › Thermal insulation › Thermal insulation to external walls

Thermal insulation to external walls in the bill of quantities

Unitm²
CategoryThermal insulation
DivisionWaterproofing and thermal insulation

The item as worded in the bill

Supply and install an external thermal insulation system to the building façades in extruded polystyrene boards 5 cm thick, bonded to walls, columns and beams and secured with mechanical fixings, then covered with a cementitious base coat reinforced with alkali-resistant glass fibre mesh, complete with corner beads and starter track; the rate includes opening reveals and external scaffolding.

Method of measurement

Measured in square metres of the net insulated façade area after deducting openings, taken on the outer face and including the columns and beams covered. Opening reveals are measured by the linear metre or their area added, as the preambles provide. Mesh, fixings and beads are not measured separately. Where the item is limited to insulating columns and beams alongside insulated block, only their outer faces are measured.

What the unit rate covers

Priced separately

Specification and reference

The energy conservation code, SBC 601 or 602 by building type, sets the thermal performance required of the external wall and the treatment of thermal bridges. SBC 201 and 801 requirements on combustible façade insulation are consulted, especially for high-rise buildings. Polystyrene boards conform to ASTM C578, and the complete system comes from one source, to its manufacturer’s instructions.

What moves the rate

Common pricing mistakes

Related calculators and terms

More items in Thermal insulation

Price your whole bill of quantities

Upload the bill of quantities and its items are priced from published references, each with its price source.

Start nowجرّب بلا تسجيل