العربية Try the demo Start now
Home › BOQ items guide › Waterproofing and thermal insulation › Roof waterproofing › Modified bitumen membrane to roofs

Modified bitumen membrane to roofs in the bill of quantities

Unitm²
CategoryRoof waterproofing
DivisionWaterproofing and thermal insulation

The item as worded in the bill

Supply and install roof waterproofing in polyester-reinforced polymer-modified bitumen membrane 4 mm thick, torch-applied over the primed screed to falls, turned up the parapet at least 20 cm above finished level and terminated with an aluminium flashing strip and sealant; the rate includes treatment of roof outlets and a 48-hour flood test.

Method of measurement

Measured in square metres of the net horizontal roof area between the inner parapet faces, plus the upstands on the parapet, stair room walls and equipment plinths unless upstands have a linear-metre item of their own. Nothing is added for laps or falls. Outlets and small penetrations are not deducted. The stair room and lift room roof is measured under the same item.

What the unit rate covers

Priced separately

Specification and reference

The project specification and the manufacturer’s approved data sheet apply, together with the roof covering and roof drainage requirements of Saudi Building Code SBC 201. The specification sets the polymer modification type, reinforcement weight and heat resistance of the sheets to suit Saudi Arabia’s hot climate. A manufacturer-approved applicator executes it and gives a joint warranty on material and workmanship.

What moves the rate

Common pricing mistakes

Related calculators and terms

More items in Roof waterproofing

Price your whole bill of quantities

Upload the bill of quantities and its items are priced from published references, each with its price source.

Start nowجرّب بلا تسجيل