Roof waterproofing in the bill of quantities
Roof waterproofing is a system of layers, not one: a screed to falls leading water to the outlets, then a waterproof membrane, then thermal insulation and a protection layer or tiles. The commonest membrane in Saudi Arabia is torch-applied modified bitumen sheet, for its durability and ease of inspection; liquid polyurethane or acrylic is chosen for roofs with many penetrations and details or when renewing existing waterproofing. The order of layers, inverted or conventional, decides which protects the other from the intense sun.
Where it sits in the bill and what comes before it on site
Roof waterproofing items appear in the waterproofing section after masonry works. Before starting, the parapet and equipment plinths must be complete, outlets and penetrating pipes fixed and the screed to falls dry; the membrane is then flood-tested before any layer is placed over it.
Items in this category
| Item | Unit |
|---|---|
| Modified bitumen membrane to roofs | m² |
| Roof screed laid to falls | m² (or m³) |
| Liquid-applied roof membrane | m² |
What is often left out when pricing it
- Turning the membrane up the parapet, stair room walls and equipment plinths, and fixing its top edge.
- The flood test, repair of any leaks it reveals, and re-testing.
- The separation and protection layer between the membrane and the thermal insulation or tiles above it.
- Treating outlets, penetrating pipes and equipment support bases, each with its special pieces and details.
Frequently asked questions
Is the screed to falls included in the roof waterproofing rate?
Only if the item describes a complete system at one rate per square metre. In most bills the screed to falls, thermal insulation and tiles are separate items. Read the item layer by layer, check it against the roof section, and carry any layer without its own item in the nearest related one.
How do I measure the vertical parts of roof waterproofing?
Either their area is added to the horizontal area in one item, or they are measured by the linear metre in a separate item stating the height, as the preambles provide. Length comes from the perimeters of the parapet, stair room walls, equipment plinths and roof openings, and height from the membrane termination detail.
What does the waterproofing warranty cover and how does it affect the rate?
Most specifications require a warranty of several years on material and workmanship together, issued by a specialist applicator approved by the manufacturer. This limits the work to particular applicators and raises the rate above non-specialist labour. Confirm the warranty period required and that the subcontractor’s offer covers it before adopting his rate.
Related calculators and terms
Other categories in Waterproofing and thermal insulation
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل