Reinforcing steel in the bill of quantities
| Unit | tonne (or kg) |
|---|---|
| Category | Reinforcement and formwork |
| Division | Concrete works |
The item as worded in the bill
Supply, cut, bend and fix high-strength deformed reinforcing bars with a yield strength of not less than 420 MPa (Grade 60) to ASTM A615, in all diameters and for all concrete elements in accordance with the drawings and approved bar bending schedules; the rate includes tying wire, chairs, concrete spacers, waste, handling and hoisting.
Method of measurement
Theoretical weight is measured: bar lengths from the approved bar bending schedules multiplied by the weight per metre of each diameter, which in kilograms equals the square of the diameter in millimetres divided by 162. Bends, hooks and lap splices shown on the drawings are included in the lengths. Tying wire, chairs, spacers, waste and rolling margin are not measured.
What the unit rate covers
- Supplying bars in the required diameters
- Preparing bar bending schedules
- Cutting and bending
- Fixing and tying
- Chairs, spacers and tying wire
- Waste, handling and hoisting
Priced separately
- Mechanical couplers, if required
- Epoxy-coated bars, if required
- Welded mesh reinforcement
- Post-tensioning tendons
Specification and reference
Reinforcement complies with ASTM A615 or its equivalent Saudi standard, and the Saudi Building Code SBC 304 sets development lengths, lap splices, bend diameters and concrete cover. A mill certificate accompanies every delivery, and tension and bend samples are tested in an approved laboratory under the inspection and test plan.
What moves the rate
- Split between small and large diameters
- Complexity of bending and number of ties
- Building height and means of hoisting
- Cutting and bending on site or in a central yard
Common pricing mistakes
- Applying one fixed waste to all diameters without a cutting list, although waste on large bars differs from waste on ties.
- Building the rate per tonne on the purchased weighbridge weight, although the paid weight is theoretical and excludes chairs and waste.
- Overlooking lap splices in columns at every floor and in long bars exceeding the 12 m stock length.
- Pricing the fixing of small diameters at the rate for large ones although a tonne of them has more pieces and is slower to fix.
A published price for its main material
The monthly Kingdom-wide average as published by the General Authority for Statistics, with its monthly series: 16mm national Reinforcing iron
Related calculators and terms
More items in Reinforcement and formwork
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل