Internal LED light fittings in the bill of quantities
| Unit | No. (or lin. m for linear strips) |
|---|---|
| Category | Lighting and wiring accessories |
| Division | Electrical works |
The item as worded in the bill
Supply and install a round recessed LED downlight, 12 W, with a die-cast aluminium body and diffuser, colour temperature 4000 K and colour rendering index not less than 80, with a separate electronic driver; the rate includes cutting the false ceiling, connection to the point by flexible cable and quick connector, testing, and spare fittings as specified.
Method of measurement
Measured by number for each type and reference in the luminaire schedule separately, counted from the reflected ceiling plan, not the architectural floor plan. Linear strips and concealed cove lighting are measured in linear metres including drivers and the aluminium profile. Drivers and lamps are not counted separately. Emergency fittings and exit signs are counted under their own items even where they look like normal fittings.
What the unit rate covers
- Complete light fitting with driver
- Suspension or ceiling fixing accessories
- Cutting the false ceiling to size
- Connection to the point and earthing
- Testing and replacing failures until handover
Priced separately
- The lighting point of conduits and wires
- Switches and central control and dimming systems
- The false ceiling and cove recesses
Specification and reference
Governed by SBC 401 for connection and earthing, by SBC 601 or SBC 602 for allowed lighting power density, and by the energy efficiency requirements of the Saudi Standards, Metrology and Quality Organization. Fittings comply with IEC 60598 with a protection degree suited to the location, and luminous flux, life and warranty data are submitted with the sample.
What moves the rate
- Wattage, luminous flux and fitting type
- Origin and warranty period
- Dimmability and driver type
- Protection degree for wet and outdoor areas
Common pricing mistakes
- Counting fittings from an old electrical drawing when the updated architectural reflected ceiling plan increases the number and changes the layout.
- Pricing a standard fitting for bathrooms, kitchens and balconies when the schedule calls for a higher moisture protection degree.
- Ignoring fixing labour at height in lobbies, mosques and halls, and the mobile scaffold or lift it requires.
- Pricing linear strip at the strip price alone without the aluminium profile, diffuser and a driver for every set length.
Related calculators and terms
More items in Lighting and wiring accessories
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل