Lighting and wiring accessories in the bill of quantities
This category holds what is installed last and seen by the user: internal light fittings, switches and sockets, and external site lighting with its poles. LED fittings are now the norm for their efficiency and long life, ranging from downlights recessed in false ceilings and square panels for offices to linear, surface and moisture-resistant types. Switches and sockets vary from economy to luxury grades with the project level. External lighting covers road and car park poles, facade floodlights and garden lighting, with buried supply and control by photocell or timer.
Where it sits in the bill and what comes before it on site
Listed after the boards, by number for each type to the luminaire schedule on the drawings. Fittings are installed after false ceilings and final painting; external poles are erected after their foundations are cast and cables laid, and before final asphalt or paving.
Items in this category
| Item | Unit |
|---|---|
| Internal LED light fittings | No. (or lin. m for linear strips) |
| Switches and socket outlets | No. |
| External lighting and poles | No. for poles, lin. m for cables |
What is often left out when pricing it
- Separate LED drivers and dimming systems, which do not always come in the box with the fitting.
- Emergency light fittings and illuminated exit signs with their batteries: a Civil Defense requirement, not an option.
- Spare fittings in the proportion the specification requires for handing to the owner with spare parts.
- Motion sensors, photocells, timers and lighting control contactors for external lighting and corridors.
Frequently asked questions
Do I price the light fitting together with its point or separately?
Most bills separate the lighting point — conduits and wires up to the outlet — from the fitting itself, supplied and fixed. Some combine them in one item. Check the description, and note that fittings may outnumber points where several downlights are looped from a single point.
The specification names three sources or equal; how do I price?
Price on a source that fully meets the technical specification: luminous flux, colour temperature, colour rendering index, protection degree, life and warranty. An equivalent is accepted only on a technical comparison approved by the engineer, who may ask for lighting calculations proving the required illuminance. Do not price on an alternative whose acceptance is uncertain.
What mounting heights apply to switches and sockets?
The drawings and specification set them; normally switches are at an easily reached height beside the door on the lock side, general sockets near the floor, and kitchen sockets above the worktop. For the estimator, height fixes the drop length in the wall; air conditioner and heater outlets are high, so their drops are short.
Related calculators and terms
Other categories in Electrical works
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل