External lighting and poles in the bill of quantities
| Unit | No. for poles, lin. m for cables |
|---|---|
| Category | Lighting and wiring accessories |
| Division | Electrical works |
The item as worded in the bill
Supply and erect an external lighting pole in hot-dip galvanised steel, 6 m high, tapered or polygonal, with base plate, service door and internal cut-out, with a 100 W LED luminaire rated IP65; the rate includes the reinforced concrete foundation with anchor bolts, excavation and backfilling, the internal cable from door to luminaire, the earth rod, connection and testing.
Method of measurement
Poles are measured by number, each height and number of arms separately, including foundation and luminaire where the description combines them; otherwise luminaires have their own item. Garden, wall-mounted and in-ground fittings are counted per type. Buried cables and ducts are measured in linear metres from the external lighting panel to each pole in sequence, the trench with them or under its own item, and pull pits by number.
What the unit rate covers
- Pole, base plate and service door
- Concrete foundation and anchor bolts
- Luminaire and its bracket arm
- Cut-out and internal cable
- Earthing, erection and plumbing
Priced separately
- Buried cables between poles and their trench
- External lighting panel and controls
- Reinstating asphalt or paving after trenching
Specification and reference
Supply and earthing are governed by SBC 401; pole and foundation are designed for wind loads under SBC 301 and the foundation is executed to SBC 304. Galvanising is hot-dip after fabrication to ASTM A123, the luminaire is at least IP65 and suits summer ambient temperature, and the municipality’s or road owner’s requirements for height and lighting level are observed.
What moves the rate
- Pole height, wall thickness and number of arms
- Luminaire wattage and protection degree
- Foundation size according to soil and wind
- Distance of the poles from the supply panel
Common pricing mistakes
- Pricing the pole and luminaire and forgetting the reinforced concrete foundation, anchor bolts and their setting template: a full item with excavation and casting.
- Measuring the cable between poles in a straight line, without the rise inside each pole to the service door and back down.
- Ignoring voltage drop on long runs, which requires a larger cable size than the one the circuit was priced on.
- Forgetting the crane for erecting tall poles; its mobilisation cost for a day does not fall with a small number of poles.
Related calculators and terms
More items in Lighting and wiring accessories
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل