Expansion joints in the bill of quantities
| Unit | lin. m |
|---|---|
| Category | Joints and waterstops |
| Division | Waterproofing and thermal insulation |
The item as worded in the bill
Supply and install treatment to 2.5 cm wide expansion joints in floors, walls and ceilings, comprising a compressible filler board for the full joint depth, a backing rod and flexible polyurethane sealant, and an aluminium section cover fixed to both sides flush with the finish; the rate includes cleaning the joint, primer and a fire barrier where required.
Method of measurement
Measured by the linear metre on the joint centre line, each location and treatment separately: floors, walls, ceilings, façades and roof. Floor and ceiling lengths come from each floor’s plan, wall and façade lengths from the building height wherever the joint cuts through. Nothing is added for cover splices or corners. Filler board within the concrete is measured with it or in a separate item, as the bill provides.
What the unit rate covers
- Compressible filler board
- Cleaning the joint edges and primer
- Backing rod and flexible sealant
- Metal joint cover and its fixings
- Fire barrier inside the joint where required
Priced separately
- The roof joint detail of concrete kerbs and raised waterproofing
- Waterstops in below-ground joints
- The double columns and beams on both sides of the joint
Specification and reference
The structural designer sets joint locations and width under Saudi Building Code SBC 301 and 304. Flexible sealant conforms to ASTM C920 and bituminous filler board to ASTM D1751. Where the joint crosses fire-rated walls or floors it is fitted with a tested fire barrier system in accordance with SBC 201 and 801 and Civil Defense requirements.
What moves the rate
- Joint width and expected movement
- Cover type: heavy-duty floor, pedestrian or wall
- Adjacent floor finish type
- Fire barrier requirement and its rating period
Common pricing mistakes
- Measuring the joint from one floor plan and forgetting that it repeats on every floor and runs vertically through walls and façades.
- Pricing all locations at the wall cover rate although a load-bearing floor cover costs far more.
- Leaving out the fire barrier inside the joint in buildings that require fire-resisting separation between floors.
- Calculating sealant without regard to joint width and fill depth, so consumption multiplies in wide joints.
Related calculators and terms
More items in Joints and waterstops
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل