600×600 mm tile ceiling in the bill of quantities
| Unit | m² |
|---|---|
| Category | Suspended ceilings |
| Division | Plaster, paint and gypsum works |
The item as worded in the bill
Supply and install a suspended ceiling of 600×600 mm mineral fibre or vinyl-faced gypsum tiles as the finishes schedule, laid in an exposed grid of pre-painted galvanised T-sections comprising main runners, cross tees and a wall angle at the perimeter, hung from the slab with adjustable galvanised hangers; the rate includes cutting perimeter tiles and openings for fittings.
Method of measurement
Measured in square metres of net plan area between walls. Light fittings and air outlets that replace a tile within the grid are not deducted, because the grid and suspension remain beneath them. Columns and large voids are deducted as the preambles state. Cutting waste at perimeter tiles is not measured, and the wall angle is in the rate. Bulkheads between two levels are measured separately.
What the unit rate covers
- Tiles of the approved type and thickness
- Main runners, cross tees and wall angle
- Hangers, anchors and levelling
- Cutting perimeter tiles and holes for sprinklers and detectors
- Spare tiles for maintenance where the specification requires
Priced separately
- The light fittings and air outlets themselves
- Independent suspension of heavy fittings and outlets
- Bulkheads and margins executed in gypsum board
Specification and reference
The suspension grid complies with ASTM C635 and is installed to ASTM C636, and the finishes schedule fixes the tile type, edge detail, sound absorption and moisture resistance. The Saudi general building code SBC 201 requires ceiling materials to be classified for flame spread, and Civil Defense requirements are observed in coordinating tiles with sprinklers and detectors.
What moves the rate
- Tile type: mineral fibre, vinyl-faced gypsum or metal
- Edge detail and grid type, exposed or semi-concealed
- Regular room shapes and little cutting at the perimeter
- Depth of the ceiling void
Common pricing mistakes
- Deducting the area of light fittings recessed in the grid, although practice is not to deduct them and the grid is complete beneath them.
- Ignoring cutting waste in small rooms and narrow corridors, where a large share of the tiles is cut at the perimeter.
- Pricing a standard mineral fibre tile for bathrooms and kitchens that require a moisture-resistant or metal tile under the finishes schedule.
- Forgetting the gypsum board margins that frame the tile field in many designs and are measured under another item.
Related calculators and terms
More items in Suspended ceilings
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل