External textured coating in the bill of quantities
| Unit | m² |
|---|---|
| Category | Painting |
| Division | Plaster, paint and gypsum works |
The item as worded in the bill
Supply and apply acrylic textured coating to external elevations over cement render, comprising one coat of penetrating primer, a texture coat applied by spray, roller or trowel to the approved pattern, and two finishing coats of exterior acrylic paint resistant to ultraviolet light and weathering, in the approved colour; the rate includes surface preparation, scaffolding and protection of windows.
Method of measurement
Measured in square metres of net coated area from the elevation drawings, deducting openings and areas clad in stone or panels and adding coated reveals, heads and sills. Parapets are measured on the coated face only, and projections on their developed area. Nothing is added for the roughness of the texture, the higher material consumption or the lines between colours; all of that belongs in the rate analysis.
What the unit rate covers
- Cleaning the render and treating cracks before coating
- Primer and texture coat to the approved pattern
- Two finishing coats in the approved colour
- Masking of windows, aluminium and adjacent stone
- Scaffolding or suspended platforms
- A sample panel for approval
Priced separately
- The external render itself
- Preformed mouldings and surrounds around windows
- Sealant to facade expansion joints
Specification and reference
The specification and elevation finishes schedule fix the system, applied to the manufacturer’s data sheet for thickness, consumption and drying time. The render must be cured and dry before coating, avoiding hot surfaces in direct sun. Exterior wall coverings fall under the Saudi general building code SBC 201, and the product complies with Saudi technical regulations for paints.
What moves the rate
- Pattern type and the thickness and consumption of the texture coat
- Building height and means of access to the elevation
- Number of colours and elevation subdivisions
- Condition of the render and amount of preparation before coating
Common pricing mistakes
- Calculating texture-coat consumption at the spreading rate of smooth paint, although coarse patterns consume several times as much per square metre.
- Counting the scaffolding twice in the render and coating items, or dropping it from both in reliance on the other item.
- Deducting the stone-clad area from the elevation without adding back the coated reveals and heads of windows that remain in this item.
- Overlooking the inner face of parapets and the walls of roof rooms and annexes, which usually receive the same external system.
Related calculators and terms
More items in Painting
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل