Gypsum board ceiling in the bill of quantities
| Unit | m² (or lin. m for vertical faces) |
|---|---|
| Category | Suspended ceilings |
| Division | Plaster, paint and gypsum works |
The item as worded in the bill
Supply and install a suspended ceiling of 12.5 mm gypsum boards screw-fixed to a concealed frame of galvanised steel main and furring channels, hung from the concrete slab with hangers and metal anchors, including taping and filling of joints ready for painting, cutting openings for light fittings and air outlets, and using moisture-resistant boards in wet areas.
Method of measurement
Measured in square metres of net plan area between finished wall faces, without deducting openings for downlights, air outlets and access panels. Vertical faces at level changes and light coves are measured in linear metres stating the height, or on their developed area as the bill states. Paint is measured under its own item unless stated as included, and access panels are measured by number.
What the unit rate covers
- Galvanised framing, hangers and anchors
- Boards and screws
- Tape and compound to joints and screw heads
- Cutting openings for lighting and air-conditioning fittings
- Perimeter angle or shadow gap at walls
- Mobile scaffolding
Priced separately
- Final painting
- Proprietary access panels
- Vertical faces, light coves and curtain pelmets
- Thermal or acoustic insulation above the ceiling
Specification and reference
Boards comply with ASTM C1396 and non-structural framing members with ASTM C645; framing and joint finishing follow the manufacturer’s instructions and the specified finish level. The work is governed by the gypsum board provisions of the Saudi general building code SBC 201, and in designated fire zones an approved fire-resistant assembly is used per Civil Defense requirements and the specification.
What moves the rate
- Depth of the void above the ceiling and hanger length
- Frequency of level changes and curves
- Board type: standard, moisture-resistant or fire-resistant
- Number of cut-outs and coordination with fittings
Common pricing mistakes
- Pricing only the plan area of a multi-level ceiling, although vertical faces and light coves may approach the cost of the ceiling itself.
- Overlooking hanger length and extra bracing where the void above the ceiling is deep beneath the main air-conditioning ducts.
- Using the standard board price for bathrooms and kitchens that require moisture-resistant boards, without separating their area in the take-off.
- Deducting downlight openings from the area on the assumption that they save material, when cutting and trimming them adds labour.
Related calculators and terms
More items in Suspended ceilings
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل