Suspended ceilings in the bill of quantities
A suspended ceiling is a secondary ceiling hung from the slab to conceal air-conditioning ducts and services and to control height and acoustics. The main systems are the continuous gypsum board ceiling on a concealed galvanised frame, chosen for halls and reception rooms and where shaped features and cove lighting are wanted, and the 600×600 mm tile ceiling on an exposed grid, chosen for offices, corridors, schools and hospitals because it opens easily for maintenance. Moisture-resistant boards suit bathrooms and kitchens, and metal or vinyl-faced tiles suit areas cleaned frequently.
Where it sits in the bill and what comes before it on site
Suspended ceiling items come after plastering and before final painting. Beforehand the ducts, fire pipes and cable trays above the ceiling must be complete and tested, and the reflected ceiling plan coordinated with light fittings, air outlets and sprinklers must be approved.
Items in this category
| Item | Unit |
|---|---|
| Gypsum board ceiling | m² (or lin. m for vertical faces) |
| 600×600 mm tile ceiling | m² |
What is often left out when pricing it
- Access panels below valves and air-conditioning units, priced by number and not within the ceiling area.
- Vertical faces at level changes, light coves and curtain pelmets, which are measured in linear metres.
- Strengthening of the framing around heavy light fittings, air outlets and cassette air-conditioning units.
- The wall angle or shadow-gap trim around room perimeters, whose length equals the perimeter of every space.
Frequently asked questions
Are openings for lights and air outlets deducted from the suspended ceiling area?
By common practice they are not, because cutting and trimming the openings is extra work, not a saving. The ceiling is measured by its net plan area between walls, and only large unceiled voids such as light wells and large columns are deducted where the preambles set a limit for that.
How are level changes and shaped features in a gypsum board ceiling priced?
Measure the plan area of the ceiling under the square-metre item, then measure vertical faces, curves and light coves in linear metres by their height. If the bill of quantities has no linear item for them, their effect is carried in the rate per square metre after taking their lengths from the reflected ceiling plan.
What decides the tile type in a 600×600 mm ceiling?
The function of the space: mineral fibre tiles for offices and classrooms for sound absorption, vinyl-faced gypsum tiles for corridors and service areas for easy wiping, and metal tiles for kitchens, wet and clean areas. Tile weight, price and moisture resistance differ, so price the item only once the finishes schedule confirms the type.
Related calculators and terms
Other categories in Plaster, paint and gypsum works
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل