Internal emulsion paint in the bill of quantities
| Unit | m² |
|---|---|
| Category | Painting |
| Division | Plaster, paint and gypsum works |
The item as worded in the bill
Supply and apply water-based emulsion paint to internal walls and ceilings, comprising one coat of alkali-resisting primer, two coats of filler sanded between coats and not less than two finishing coats of matt or semi-gloss acrylic emulsion to full coverage, in the colour approved by the engineer; the rate includes surface preparation, protection of adjacent work and scaffolding.
Method of measurement
Measured in square metres of net painted area, deducting openings and areas covered with tiles or panels and adding painted reveals. Ceilings are measured separately where the bill separates them. Nothing is added for the number of coats because the rate is for the complete system, and no multiplying factor is applied to moulded surfaces unless stated. Skirtings, doors and frames are outside this item.
What the unit rate covers
- Cleaning the surface, removing nibs and treating hairline cracks
- Primer coat, two filler coats and sanding
- Finishing coats to full coverage and uniform colour
- Protection of floors, windows and switch plates
- Touch-up coat before handover
Priced separately
- Painting of doors, frames and metalwork
- Special paints such as epoxy and anti-bacterial coatings
- Repair of plaster defects beyond normal preparation
Specification and reference
The finishes schedule and specification fix the paint type, sheen and number of coats, and the Saudi general building code SBC 201 classifies interior finishes for flame spread by occupancy. Specifications usually require a low-VOC product complying with Saudi technical regulations, applied to the manufacturer’s data sheet for thinning, spreading rate and drying time between coats.
What moves the rate
- Required finish level and amount of filler
- Paint grade and washability
- Dark or multiple colours within one space
- Ceiling height and size of uninterrupted areas
Common pricing mistakes
- Costing the filler as local patching when the item calls for two full sanded coats over the whole surface, understating labour and material.
- Taking the paint area equal to the plaster area without deducting bathroom and kitchen walls tiled up to the ceiling.
- Overlooking that dark colours need an additional finishing coat for full coverage while the rate is built on two coats only.
- Forgetting to carry the painting of gypsum board ceilings in the paint item when the ceiling item states that it excludes paint.
Related calculators and terms
More items in Painting
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل