200 mm hollow concrete blockwork in the bill of quantities
| Unit | m² |
|---|---|
| Category | Concrete block |
| Division | Masonry works |
The item as worded in the bill
Supply and build walls in hollow concrete blocks 40×20×20 cm of the compressive strength stated in the specification, laid in 1:3 cement–sand mortar, to external walls and staircase walls at all floors; the rate includes column ties, bed-joint reinforcement, scaffolding, wetting with water and everything necessary to complete the work.
Method of measurement
Measured in square metres of net wall area between columns and from the slab surface to the soffit of the beam or slab above, deducting door and window openings at their structural sizes. Small openings below the limit in the preambles are not deducted, and nothing is added for wastage or cutting. Each thickness has its own item, and floors are not separated unless the bill sets height bands.
What the unit rate covers
- Supply, transport and hoisting of blocks and mortar to the place of work
- Laying to line and level with bed and perpend joints filled
- Ties to columns and bed-joint reinforcement
- Scaffolding for the storey height
- Wetting the wall after laying
- Cutting and breakage wastage
Priced separately
- Concrete lintels over openings
- Concrete stiffener columns and beams
- Plaster and paint
- Thermal insulation of columns and beams
Specification and reference
Blockwork is governed by Saudi Building Code SBC 305 for masonry and by the project technical specification. Load-bearing block conforms to ASTM C90 and mortar to ASTM C270, and the block sample and its strength test are approved before delivery. Where the external wall is not otherwise insulated, the thermal insulation requirements of SBC 601 and 602 are checked.
What moves the rate
- Block strength, source and distance from the factory to the site
- Storey height, number of floors and means of hoisting
- Many openings, corners and short walls
- Size of the quantity and regularity of supply
Common pricing mistakes
- Measuring wall height from level to level without deducting the depth of the downstand beam or the slab thickness.
- Taking external wall lengths on grid lines without deducting the widths of the concrete columns within them.
- Pricing upper floors at the ground-floor rate while ignoring hoisting and external scaffolding costs.
- Overlooking light-well and stair room walls, which are built 20 cm thick and do not appear on the elevation drawings.
A published price for its main material
The monthly Kingdom-wide average as published by the General Authority for Statistics, with its monthly series: 20cm black Block
Related calculators and terms
More items in Concrete block
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل