150 mm blockwork for internal partitions in the bill of quantities
| Unit | m² |
|---|---|
| Category | Concrete block |
| Division | Masonry works |
The item as worded in the bill
Supply and build internal partitions in hollow concrete blocks 40×20×15 cm laid in 1:3 cement–sand mortar, between rooms and corridors at all floors, with partitions tied to columns and intersecting walls and restrained at the head under the slab; the rate includes bed-joint reinforcement, scaffolding and everything necessary as shown on the drawings.
Method of measurement
Measured net in square metres: length between the faces of the walls or columns where the partition ends, not between grid lines, and height from the slab surface to the soffit of the slab or beam above. Door openings are deducted at structural size, not leaf size. Where two partitions cross, one is taken through and the other stopped at its face, to avoid counting the junction twice.
What the unit rate covers
- Supply of 15 cm blocks and mortar and hoisting to the floor
- Laying bonded into intersecting walls
- Metal ties to columns and bed-joint reinforcement
- Restraining the partition head under the slab or beam
- Light internal scaffolding
- Clearing and removing debris
Priced separately
- Lintels over door openings
- Stiffener columns and beams for long or high partitions
- Cutting and making good chases for services
- Plaster
Specification and reference
Partitions are governed by Saudi Building Code SBC 305, with SBC 201 and 801 consulted where a fire-resistance period is required, as in corridor walls and walls between apartments. Non-load-bearing block conforms to ASTM C129 and mortar to ASTM C270. The project specification sets the thickness for each location; 15 cm is not reduced without the engineer’s approval.
What moves the rate
- Many door openings and short partition lengths
- Storey height and the need for stiffeners
- Means of hoisting and distributing materials within the floor
- Overlap with electrical and plumbing first fix
Common pricing mistakes
- Taking partitions off an outdated architectural plan after the room layout was revised in the latest drawing issue.
- Measuring bathroom and kitchen partitions at 15 cm although the drawings sometimes require 20 cm to take the drainage pipes.
- Measuring partition lengths between grid lines, so the thicknesses of intersecting walls enter the area twice.
- Overlooking short partitions around service ducts, behind built-in wardrobes, under the staircase and at bathroom entrances.
A published price for its main material
The monthly Kingdom-wide average as published by the General Authority for Statistics, with its monthly series: 15cm black Block
Related calculators and terms
More items in Concrete block
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل