Autoclaved aerated concrete blockwork in the bill of quantities
| Unit | m² |
|---|---|
| Category | Insulated and lightweight block |
| Division | Masonry works |
The item as worded in the bill
Supply and build walls in autoclaved aerated concrete blocks 60×20 cm on face and 20 cm thick, of the density and strength stated in the specification, laid in the system’s thin-bed adhesive with the first course on a levelled cement mortar bed; the rate includes saw cutting, metal ties to columns, scaffolding and everything necessary to the manufacturer’s instructions.
Method of measurement
Measured net in square metres with openings deducted, stating the thickness in each item because this block comes in many thicknesses. Height is taken from the slab surface to the beam soffit, including the first levelling course. Adhesive and cutting are not measured separately. Ready-made lintels of the same material, where used, are measured by number or linear metre in a separate item outside the wall area.
What the unit rate covers
- Supply of aerated blocks on pallets and careful handling
- Thin-bed adhesive and its notched trowels
- Levelling mortar for the first course
- Saw cutting at openings and corners
- Metal ties to columns and slabs
- Scaffolding and hoisting
Priced separately
- Plaster made for aerated block and its fibre mesh
- Ready-made or cast lintels
- Special fixings for hanging loads
Specification and reference
The item is governed by Saudi Building Code SBC 305 and the approved manufacturer’s instructions, and the block conforms to ASTM C1693 as to strength class and density. SBC 601 or 602 is consulted to confirm that the chosen wall thickness achieves the required thermal insulation, and SBC 201 for the fire-resistance period of separating walls.
What moves the rate
- Block thickness and density class
- Masons’ experience with thin-bed adhesive
- Distance from the factory and palletised haulage cost
- Amount of breakage in handling and storage
Common pricing mistakes
- Building the rate on ordinary cement mortar with a 1 cm joint instead of thin-bed adhesive, whose consumption the manufacturer sets.
- Counting blocks on a 40×20 cm face although the aerated block face is larger, so fewer units go per square metre.
- Overlooking that plaster over this block needs special materials or preparation recommended by the manufacturer, at a higher cost.
- Storing pallets uncovered and then bearing chipped edges and water-soaked blocks without allowing for it in the wastage.
Related calculators and terms
More items in Insulated and lightweight block
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل