Insulated and lightweight block in the bill of quantities
This category covers insulated block incorporating a polystyrene layer or inserts, lightweight volcanic block, and autoclaved aerated concrete block. Their purpose is to achieve the thermal insulation required for external walls without adding a separate insulation layer, and to reduce the dead load on the frame. Insulated block with a continuous layer is chosen when a low thermal transmittance is required; aerated block is chosen when light weight, speed of laying and dimensional accuracy are wanted together, provided its own adhesive and plaster are used.
Where it sits in the bill and what comes before it on site
These items appear within masonry works, mostly for the external walls. Before starting, the block’s thermal performance test certificate must be approved, the insulation details for columns and beams confirmed, and the system’s own adhesive or mortar delivered.
Items in this category
| Item | Unit |
|---|---|
| Insulated blockwork for external walls | m² |
| Autoclaved aerated concrete blockwork | m² |
What is often left out when pricing it
- Insulating the faces of external columns and beams against thermal bridging, which is not part of the blockwork.
- Special units at corners and opening jambs, and half blocks, which are supplied at a different rate.
- The thin-bed adhesive, fibre mesh and special fixings that aerated block alone requires.
- Higher breakage in handling and storage, since these types are weaker than ordinary block.
Frequently asked questions
Does insulated block remove the need to insulate columns and beams?
No. The block insulates the wall area only; the concrete columns and beams remain thermal bridges that conduct heat inwards. Specifications usually require their outer faces to be covered with insulation boards before plastering, and this is priced in a separate thermal insulation item, not within the block rate.
How do I compare insulated block suppliers’ offers?
Compare on the thermal transmittance of the finished wall stated in a test certificate from an accredited laboratory, not on polystyrene thickness alone. Also check compressive strength, continuity of the insulation layer at the joints, availability of corner and half units, and whether the price includes delivery and unloading on site.
Does the laying output of aerated block differ from ordinary block?
Yes. An aerated block has a larger face and is lighter, so it covers the area with fewer units and is laid faster, but it needs masons experienced with thin-bed adhesive and an accurately levelled first course. Do not carry over concrete block outputs unchanged, or assume a labour saving with an untrained gang.
Related calculators and terms
Other categories in Masonry works
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل