Vanity and kitchen countertops in the bill of quantities
| Unit | lin. m (or m² or No.) |
|---|---|
| Category | Marble and granite |
| Division | Flooring and cladding |
The item as worded in the bill
Supply and fix a vanity or kitchen countertop in approved granite or marble 2 cm thick, of width as the drawings, with a double-thickness front edge chamfered or rounded and polished, a backsplash upstand against the wall, cut-outs for basins and mixers with polished edges, fixed on galvanised steel brackets or on cabinets, with silicone sealant at the wall.
Method of measurement
Measured in linear metres along the top at the wall with the width stated, the rate covering the front edge, the backsplash and the cut-outs. It is sometimes measured in square metres of top with apron and upstand in linear metres, or by number for repeated identical vanities. L-shaped tops are measured along the centre line, counting the corner once. Basin cut-outs are not deducted.
What the unit rate covers
- Top slab of the stated thickness and width
- Front apron and backsplash upstand
- Cut-outs for basins and mixers with polished edges
- Chamfering and polishing of exposed edges
- Epoxy adhesive to joints and silicone sealant
Priced separately
- Basins and mixers and their installation
- Steel brackets or carrying cabinets where a separate item exists
- Mirrors and accessories
Specification and reference
Granite complies with ASTM C615 and marble with ASTM C503; the material is approved against a sample of colour and finish. Granite or low-absorption engineered stone is preferred for kitchen tops because acids attack and stain marble. Shop drawings fix joints, cut-outs and supports, and the work follows the project specification and the Saudi code SBC 201.
What moves the rate
- Stone type, thickness and top width
- Front edge profile and apron height
- Number of basin cut-outs and type, top-mounted or undermounted
- Piece length and joint positions
Common pricing mistakes
- Pricing the top on its area alone and forgetting the apron, the backsplash and edge polishing, which add substantial material and workmanship.
- Ignoring that an undermounted basin cut-out needs its whole inner edge polished and support under the slab, unlike a top-mounted basin.
- Calculating from top lengths without regard to available slab length, leading to unacceptable joints or the purchase of a whole extra slab.
- Forgetting the steel brackets for wall-hung vanities with no cabinet beneath, leaving the top with no priced support.
Related calculators and terms
More items in Marble and granite
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل