Marble and granite in the bill of quantities
Marble and granite are natural stones cut into slabs and tiles to clad floors, stairs, walls and countertops. Marble is softer and richer in veining but sensitive to acids, so it is chosen for halls, entrances and walls; granite is harder and less absorbent, so it is chosen for stairs, kitchen tops and heavy-traffic areas. Prices vary widely by type, quarry, selection grade and thickness; common floor thickness is 2 to 3 cm. It is fixed in cement mortar or adhesive and polished on site after laying.
Where it sits in the bill and what comes before it on site
Marble and granite items follow ceramic tiling or form a separate stone section. Approval of samples and of shop drawings for slab layout and veining comes first, with wet trades and underfloor services finished; final polishing is left until other trades are done.
Items in this category
| Item | Unit |
|---|---|
| Marble flooring | m² |
| Marble or granite stair cladding | lin. m (or No. per step) |
| Vanity and kitchen countertops | lin. m (or m² or No.) |
What is often left out when pricing it
- Grinding and polishing on site after laying, and the stain-protection sealer where specified.
- Chamfering, rounding and polishing of exposed edges on stairs and tops, priced per linear metre of edge.
- Waste from selection and matching of veining and colour, which exceeds cutting waste alone.
- White cement and special bedding under light-coloured marble to prevent staining from behind.
Frequently asked questions
Why does the rate per square metre of marble differ so much between two offers for the same type?
Because one trade name covers different selection grades in uniformity of colour and veining and freedom from defects, and different thicknesses, sizes and finishes. Offers are compared against an approved sample and a stated size and thickness, noting whether the price includes site polishing and waste or supply only.
Are chamfered and polished marble edges measured separately?
Floor items have no exposed edges to measure. For stairs, tops and sills the edge treatment is stated in the description and included where the item is measured in linear metres; where the stone is measured in square metres, worked edges are better measured in linear metres as a separate item.
When is marble fixed with adhesive rather than mortar?
For thin or large-format slabs, on walls, and for moisture-sensitive stones that stain or curl from the water in mortar. Adhesive needs a true surface prepared beforehand, and a white adhesive is used under light-coloured stones. Traditional mortar bedding is still common for floors of normal thickness.
Related calculators and terms
Other categories in Flooring and cladding
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل