Ceramic wall tiling to wet areas in the bill of quantities
| Unit | m² |
|---|---|
| Category | Ceramic and porcelain tiles |
| Division | Flooring and cladding |
The item as worded in the bill
Supply and fix first-grade glazed ceramic wall tiles 300×600 mm to bathroom and kitchen walls up to suspended ceiling level, fixed with cementitious adhesive on true rough plaster or on cement boards, with regular joints filled with water- and mould-resistant grout, including trims at external corners, cutting around sanitary fittings, switches and outlets, and cleaning.
Method of measurement
Measured in square metres of net area clad, from finished floor level to the stated height, deducting doors and windows and adding their clad reveals and sills. Areas behind baths and cabinets are deducted only if actually left untiled. Decorative borders and feature tiles are measured in linear metres or by number where an item exists, and corner trims in linear metres or within the rate as stated.
What the unit rate covers
- Tiles of the approved size and colour
- Adhesive and water-resistant grout
- Cutting around pipes, boxes and sanitary fittings
- External corner trims where stated
- Cleaning and removal of grout residue
Priced separately
- Rough plaster or boards behind the tiles
- Waterproofing of shower walls
- Decorative borders and feature tiles
- Silicone sealant around sanitary fittings
Specification and reference
Tiles are classified under ISO 13006 and the adhesive complies with EN 12004 in the class suited to wall tiling. The specification fixes the height of tiling, the grout type and the corner treatment. The work falls under the Saudi general building code SBC 201, which requires smooth, non-absorbent surfaces to the walls of bathrooms and shower areas.
What moves the rate
- Tile size and amount of cutting in small bathrooms
- Height of tiling, to the ceiling or to a set level
- Decorative borders or a special laying pattern
- Trueness of the plaster or boards behind the tiles
Common pricing mistakes
- Measuring walls up to the concrete slab although tiling stops just above the suspended ceiling level, overstating the area in every bathroom.
- Forgetting window reveals and sills and the faces of boxed-in risers and ledges, small areas heavy in cutting and corners.
- Using the floor waste allowance for bathroom walls, although cutting around fittings, outlets and windows raises wall waste.
- Pricing ordinary cementitious grout where the specification demands epoxy grout in commercial kitchens and food preparation areas.
Related calculators and terms
More items in Ceramic and porcelain tiles
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل