Vinyl flooring in the bill of quantities
| Unit | m² |
|---|---|
| Category | Resilient and wood flooring |
| Division | Flooring and cladding |
The item as worded in the bill
Supply and lay homogeneous vinyl flooring in sheets 2 m wide and 2 mm thick, bonded with approved acrylic adhesive to a self-levelling underlayment over a dry screed, with seams heat-welded with matching rod, and the vinyl turned up the wall 10 cm over a cove former as an integral skirting; the rate includes cleaning and the first polish coat.
Method of measurement
Measured in square metres of net horizontal area covered between walls, deducting columns and fixed plinths. Coved skirting is measured in linear metres under a separate item, or is in the rate where the description says so. Roll-width waste and overlap at welds are not measured. The self-levelling underlayment is measured under its own item in square metres unless stated as included, and transition strips at doors in linear metres.
What the unit rate covers
- Vinyl of the approved type and thickness
- Adhesive and priming of the surface
- Heat welding of seams
- Cutting around columns, doors and fittings
- Cleaning and the first coat of polish where required
Priced separately
- Self-levelling underlayment
- Coved skirting and cove former where a separate item exists
- Transition strips and thresholds
- Moisture barrier beneath the floor
Specification and reference
The specification fixes the vinyl type, homogeneous or heterogeneous, its thickness, wear layer, slip resistance and anti-bacterial or static-dissipative properties for hospitals and laboratories. It is laid to the manufacturer’s data sheet, notably screed moisture limit and flatness. The Saudi general building code SBC 201 requires floor finishes in exit routes of certain occupancies to be classified for fire performance.
What moves the rate
- Vinyl type: homogeneous sheet, tiles or luxury planks
- Thickness and wear layer
- Condition of the screed and need for self-levelling
- Coved skirting and seam welding
Common pricing mistakes
- Pricing vinyl without the self-levelling underlayment, although any ridge or grain of sand in the screed shows through the surface once bonded.
- Calculating sheet quantity from the net area without a laying plan, losing part of the roll width in corridors and narrow rooms.
- Omitting the coved skirting, cove former and capping strip in hospital rooms, which is fine labour at every corner and door.
- Using the standard vinyl price for operating theatres and laboratories that require a static-conductive type with a copper earthing grid.
Related calculators and terms
More items in Resilient and wood flooring
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل