Marble or granite stair cladding in the bill of quantities
| Unit | lin. m (or No. per step) |
|---|---|
| Category | Marble and granite |
| Division | Flooring and cladding |
The item as worded in the bill
Supply and fix stair cladding in approved granite or marble, comprising a one-piece 3 cm tread with a rounded polished nosing projecting over the riser, and a 2 cm riser, bedded in cement mortar on the concrete stair, with anti-slip grooves near the tread edge and polished exposed edges; the rate includes cutting to actual stair dimensions, grouting and cleaning.
Method of measurement
Measured in linear metres of step length, the rate covering tread and riser together, with tread width and riser height stated. It is sometimes measured by number for steps of equal length, or in square metres for treads and risers separately. Landings are measured in square metres, and stepped skirtings in linear metres or by number per step. Nothing is added for rounding and polishing the nosing.
What the unit rate covers
- Tread and riser of the stated thicknesses
- Rounding the tread nosing and polishing exposed edges
- Anti-slip grooves
- Bedding mortar and grouting
- Cutting to actual stair dimensions
Priced separately
- Landings
- Stepped stair skirtings
- Balustrade and its fixing into the stone
- Metal anti-slip inserts, if required
Specification and reference
Granite complies with ASTM C615 and marble with ASTM C503. The means-of-egress provisions of the Saudi general building code SBC 201 govern tread and riser dimensions, their uniformity and the walking surface, so the cladding must preserve these dimensions after fixing with no variation in riser height. The specification fixes thicknesses, nosing profile and anti-slip treatment.
What moves the rate
- Stone type and tread thickness
- One-piece or two-piece tread
- Nosing profile and edge treatment
- Straight stairs, winders or circular stairs
Common pricing mistakes
- Pricing a step at the floor rate for the same stone, although the tread is thicker, edge-worked and cut in one piece to step length.
- Forgetting winders and circular stairs, where every tread is cut to its own template and waste is far above that of straight flights.
- Overlooking the stepped skirting on both sides, small heavily cut pieces that repeat with every step.
- Not checking the concrete riser heights before pricing, so the first and last steps need adjustment to equalise the rise once cladding thickness is added.
Related calculators and terms
More items in Marble and granite
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل