Terrazzo tiles in the bill of quantities
| Unit | m² |
|---|---|
| Category | Screeds and terrazzo |
| Division | Flooring and cladding |
The item as worded in the bill
Supply and lay pressed cement terrazzo tiles 400×400 mm, not less than 3 cm thick, with a face of marble chips in white or coloured cement, bedded in cement–sand mortar over a clean sand bed, with tight joints grouted with cement slurry matching the tile colour, including grinding in stages and polishing on site after the grout hardens, and cleaning.
Method of measurement
Measured in square metres of net tiled area between walls, deducting columns and untiled areas. Terrazzo skirting is measured in linear metres, and precast terrazzo stair treads in linear metres or by number, under separate items. Waste, the sand bed and the mortar are not measured. Roof tiling over waterproofing is measured under a separate item because its layers and joints differ.
What the unit rate covers
- Tiles of the approved size, thickness and colour
- Sand bed and cement mortar
- Cutting at perimeters and grouting of joints
- Grinding and polishing on site where the description says so
- Cleaning and protection
Priced separately
- Terrazzo skirtings and stair treads
- Waterproofing and protection layers under roof tiling
- Expansion joints and their sealant on roofs
Specification and reference
Terrazzo tiles comply with EN 13748 or the corresponding Saudi standard for flexural strength, abrasion and water absorption, and are supplied adequately aged. Cement complies with ASTM C150. The specification fixes size, thickness and marble chip size and colour. The Saudi general building code SBC 201 applies, and expansion joints are left in roof tiling exposed to the sun.
What moves the rate
- Tile size and thickness
- Cement colour and type of marble chips
- Site grinding or factory-ground tiles
- Location: internal floor or roof over waterproofing
Common pricing mistakes
- Leaving site grinding and polishing out of the analysis, although it consumes plant, water, abrasive stones and labour over several passes.
- Pricing roof tiling at the internal floor rate without expansion joints, their sealant and the difficulty of hoisting heavy tiles to the roof.
- Calculating the mortar only and forgetting the sand bed beneath it, which consumes a considerable volume over the whole floor.
- Adopting the price of ordinary grey tiles for an item that specifies white cement and coloured marble chips, which cost more.
A published price for its main material
The monthly Kingdom-wide average as published by the General Authority for Statistics, with its monthly series: National Marble tiles
Related calculators and terms
More items in Screeds and terrazzo
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل