Ceramic and porcelain tiles in the bill of quantities
Ceramic and porcelain are pressed ceramic tiles for floors and walls. Porcelain has very low water absorption and higher hardness, so it is chosen for floors, external areas and heavy traffic, while lighter glazed ceramic is chosen for bathroom and kitchen walls. Tiles are fixed either in traditional cement mortar over a sand bed, or with cementitious adhesive on a screed or true plaster; adhesive is preferred for large formats and low-absorption porcelain. Tile size, rectified edges and grout type determine the level of waste and labour.
Where it sits in the bill and what comes before it on site
Tiling items sit in the flooring and cladding section after plastering and waterproofing. Beforehand come the flood test of bathroom waterproofing, pressure testing of supply and drainage pipes, fixing of electrical boxes, and laying of the screed with levels and falls set.
Items in this category
| Item | Unit |
|---|---|
| Porcelain floor tiling | m² |
| Ceramic wall tiling to wet areas | m² |
| Skirting | lin. m |
What is often left out when pricing it
- Aluminium or stainless steel trims at external corners and tile ends, measured in linear metres.
- Cutting waste at perimeters and around columns, which rises with large formats and diagonal laying.
- Epoxy or anti-bacterial grout required in kitchens and wet areas instead of cementitious grout.
- Protection of finished floors with board or sheeting until handover, and spare tiles for maintenance.
Frequently asked questions
Is tile waste included in the measured quantity?
No. Only the net tiled area is measured, and waste is carried in the unit rate. Waste is estimated from the tile layout of each space and depends on tile size, room shape and laying direction. Small rooms with many corners, diagonal laying and large formats raise waste above that of open regular areas.
How does pricing differ between mortar bedding and adhesive fixing?
Traditional mortar needs a sand bed, cement and a greater thickness under the tile, and tolerates an uneven base. Adhesive needs a true screed, priced under its own item, then a thin adhesive bed. A comparison must add the screed to the adhesive and allow for the finished-level difference at doors and stairs.
How are items that fix a prime cost supply rate for tiles priced?
The item fixes a prime cost rate for supplying a square metre of tile; the contractor adds waste, transport, handling, fixing and grouting materials, labour and profit. If a tile at a different price is selected, only the supply difference is adjusted. A larger tile may also raise labour and waste.
Related calculators and terms
Other categories in Flooring and cladding
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل