Wet areas and tanks waterproofing in the bill of quantities
This category covers waterproofing the floors and walls of bathrooms, kitchens, laundry rooms and balconies, and lining water tanks internally. The commonest wet-area material is a two-component polymer-modified cementitious coating, brushed on in two coats and able to take tiles; liquid polyurethane is used where more flexibility is wanted. Tanks are lined with materials approved for contact with drinking water: a crystalline or flexible cementitious coating, or a solvent-free epoxy coating, chosen by the condition of the concrete and the cracking expected.
Where it sits in the bill and what comes before it on site
These items appear in the waterproofing section and follow plastering, plumbing first fix with its pressure test and fixing of floor drains, and precede tiling. Tanks are lined once the concrete is fill-tested and repaired, and before pumps and float valves are installed.
Items in this category
| Item | Unit |
|---|---|
| Cementitious waterproofing to wet areas | m² |
| Internal lining of water tanks | m² |
What is often left out when pricing it
- Turning the waterproofing up the walls, and full-height shower walls where the specification requires.
- Mesh reinforcing strips at corners, around floor drains and penetrating pipes and at the door threshold.
- The ponding test for each bathroom before tiling, and its waiting time in the programme.
- Ventilation, lighting and safety equipment for confined-space work while lining the tank.
Frequently asked questions
How high is bathroom waterproofing turned up the walls?
The specification and details decide. Common practice is a strip above finished floor level on all walls, and up to shower height or the full wall in the showering zone. The difference in area is large, so do not price on floor area alone; work out the vertical area from each bathroom’s perimeter.
Does lining a tank internally differ from waterproofing it externally?
Yes; they are separate items. External waterproofing keeps out soil water and salts and uses bitumen. Internal lining stops the stored water leaking and protects the concrete, and must be of a material approved for contact with drinking water. Neither replaces the other, and bitumen must not be used inside a drinking water tank.
Is the ponding test repeated if it fails, and at whose cost?
Yes. The leak is repaired and the test repeated for the same duration until it passes, all at the contractor’s cost as part of handing over the waterproofing. The unit rate carries the risk of repetition, and testing each bathroom separately helps locate the leak and avoids holding up tiling on the whole floor.
Related calculators and terms
Other categories in Waterproofing and thermal insulation
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل