Resilient and wood flooring in the bill of quantities
This category gathers floors that are glued or assembled on a finished level base: vinyl in sheets, tiles and planks for hospitals, schools and shops because it is easy to clean; solid or engineered wood parquet for bedrooms and offices; carpet in rolls or tiles for offices, hotels and mosques for comfort and sound absorption; and raised floors on pedestals for computer rooms and offices with services running beneath. What they share is complete dependence on a flat, dry screed, since any defect beneath shows on the surface.
Where it sits in the bill and what comes before it on site
These items come last in the flooring section and are laid in the final finishing stages. Beforehand the screed must be dry and moisture-tested, painting and ceilings finished, the air conditioning running to stabilise temperature and humidity, and the building closed.
Items in this category
| Item | Unit |
|---|---|
| Vinyl flooring | m² |
| Parquet flooring | m² |
| Carpet flooring | m² |
| Raised access floor | m² |
What is often left out when pricing it
- The thin self-levelling compound over the screed before vinyl and parquet, usually priced as a separate item.
- Transition profiles and thresholds at doors and between two floor types at different levels.
- The skirting particular to each system, such as coved vinyl or timber skirting, measured in linear metres.
- Screed moisture testing and a damp-proof barrier on floors in contact with the ground.
Frequently asked questions
Why must screed moisture be measured before these floors?
Because moisture trapped under vinyl, parquet and glued carpet ruins the adhesive and causes blistering, cupping and mould after handover. The data sheet sets the limit and test method. The contractor allows screed drying time in the programme, or prices a moisture barrier where time is short or the floor is on the ground.
Is waste measured in sheet and plank floors?
No; only the net covered area is measured. Sheet waste is set by roll width against room width and laying direction, and plank and tile waste by the laying pattern and shape of the space. It is calculated from a laying plan for each space, and shows most in narrow corridors and irregular rooms.
Does the raised floor rate include the surface finish?
It depends on the item description. A factory-finished panel faced with vinyl or high-pressure laminate is priced with its finish, whereas a bare panel intended for carpet has the carpet measured over it under another item. Also check whether the rate includes cleaning the concrete slab, its anti-dust sealer and earthing.
Related calculators and terms
Other categories in Flooring and cladding
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل