Parquet flooring in the bill of quantities
| Unit | m² |
|---|---|
| Category | Resilient and wood flooring |
| Division | Flooring and cladding |
The item as worded in the bill
Supply and lay engineered multi-layer wood parquet flooring of 14 mm overall thickness with a factory-lacquered natural wood top layer, click-jointed, laid floating over a moisture-barrier film and sound-absorbing underlay on a true dry screed, with an expansion gap left at the perimeter and covered by the skirting, and transition profiles at doors.
Method of measurement
Measured in square metres of net area covered between finished wall faces, with no deduction for the perimeter expansion gap. Cutting waste at row ends and the waste of patterns such as herringbone are not measured. Timber skirting is measured in linear metres under a separate item, and transition profiles in linear metres or within the rate as stated. The barrier film and underlay are in the rate.
What the unit rate covers
- Parquet boards of the approved type and thickness
- Moisture-barrier film and underlay
- Cutting and the perimeter expansion gap
- Acclimatisation of the material on site before laying
- Protection after laying until handover
Priced separately
- Timber skirting
- Self-levelling underlayment, if needed
- Transition profiles where a separate item exists
- Site sanding and lacquering of unfinished wood
Specification and reference
The specification fixes the parquet type (solid, engineered or laminate), the species, top-layer thickness and laying method. It is laid to the manufacturer’s instructions, chiefly the screed moisture limit, acclimatisation of boards with the air conditioning running, and the expansion gap. SBC 201, the Saudi general building code, applies; wood is stored away from damp and direct sun.
What moves the rate
- Parquet type: solid, engineered or laminate
- Timber species and top-layer thickness
- Laying pattern, straight or herringbone
- Fixing method, floating or glued
Common pricing mistakes
- Pricing a herringbone pattern at the straight-laid rate, although its waste and labour are higher and it needs boards in special sizes.
- Confusing laminate with engineered wood that has a natural top layer in supplier offers; the two differ widely in price and performance.
- Omitting timber skirting and transition profiles at every door, which are needed to cover the expansion gap and without which the work is not accepted.
- Laying before the air conditioning runs and the screed dries because of programme pressure, then bearing the cost of replacing swollen or cupped boards.
Related calculators and terms
More items in Resilient and wood flooring
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل