العربية Try the demo Start now
Home › BOQ items guide › Flooring and cladding › Facade cladding

Facade cladding in the bill of quantities

Facade cladding is an outer skin fixed to the frame and walls to protect them and give the building its final appearance. The best-known material in the Kingdom is natural stone such as Riyadh limestone, marble and granite, fixed either by mortar bedding with metal ties for limited heights, or by dry mechanical fixing on stainless steel angles and anchors with an air cavity for taller buildings. Glass-fibre reinforced concrete elements are used for cornices, columns, screens and ornamental panels because they are light and easy to mould.

Where it sits in the bill and what comes before it on site

Cladding items sit in the facade section after external render and insulation. Beforehand come approval of shop drawings and structural calculations for the fixing system, installation of window frames, thermal insulation and waterproofing behind the cladding, and erection of scaffolding.

Items in this category

ItemUnit
Natural stone facade claddingm²
Glass-fibre reinforced concrete facade elementsm² (or lin. m for cornices, or No. for single elements)

What is often left out when pricing it

Frequently asked questions

How does pricing differ between mortar-fixed and mechanically fixed stone?

Mortar fixing consumes mortar, wire or simple ties and mason labour, and suits low buildings. Mechanical fixing needs stainless steel angles, bolts and anchors, factory drilling or slotting of the slabs, calculations and shop drawings, and stone usually not less than 3 cm thick, so material and preparation costs rise.

Is facade cladding measured net or gross?

Net: window and door openings are deducted and their clad reveals, heads and sills added, or measured in linear metres where an item is provided. Corners and columns are measured on their developed area. Check whether the bill gives special pieces separate items before loading them onto the square-metre rate.

Who carries responsibility for designing the cladding fixing system?

The contract usually makes the contractor responsible for designing the fixings and submitting calculations for slab weight, wind and seismic loads under the Saudi loading code SBC 301, for the engineer’s approval. The specialist designer’s fees and pull-out tests on anchors therefore belong in the item rate or overheads and must not be overlooked.

Related calculators and terms

Other categories in Flooring and cladding

Price your whole bill of quantities

Upload the bill of quantities and its items are priced from published references, each with its price source.

Start nowجرّب بلا تسجيل