Wallpaper in the bill of quantities
| Unit | m² |
|---|---|
| Category | Decorative finishes |
| Division | Plaster, paint and gypsum works |
The item as worded in the bill
Supply and hang vinyl wallpaper on a paper or woven backing, of the approved type and pattern, pasted to walls prepared with fine filler and a sealing primer, using the adhesive recommended by the manufacturer, with the pattern matched at vertical seams and edges trimmed at ceiling, skirting and around openings and switches, left free of bubbles and visible seams.
Method of measurement
Measured in square metres of net wall area covered, from the top of the skirting to the underside of the cornice or ceiling, deducting doors and windows and adding covered reveals. Overlaps, pattern-matching waste and roll remnants are not measured. For pricing, the area is converted into a number of rolls by roll width and length and pattern repeat, wall by wall.
What the unit rate covers
- Wallpaper from a single production batch
- Sealing primer and adhesive
- Pattern matching and trimming of edges
- Removing and refitting switch plates
- Spare rolls for maintenance where the specification requires
Priced separately
- Filler preparation of the wall where a separate item exists
- Skirtings, cornices and borders
- Stripping old wallpaper in refurbishment work
Specification and reference
The finishes schedule and specification fix the wallpaper type, weight and washability. SBC 201, the Saudi general building code, treats wallpaper as an interior wall finish needing the flame-spread classification suited to the occupancy; its certificate is requested in hotels and public buildings. Hanging follows the manufacturer’s instructions, and rolls come about 53 cm or about 106 cm wide.
What moves the rate
- Wallpaper type, weight and roll width
- Pattern repeat and the waste it causes
- Wall height and number of openings and corners
- Required quality of wall preparation
Common pricing mistakes
- Converting area to rolls by dividing by the nominal roll area, without counting the full drops each roll yields for the wall height.
- Ignoring the pattern repeat; large patterns lose part of every drop in matching the design to the adjacent drop.
- Buying the quantity in instalments from different batches, so shade differences show between drops and the work is rejected and redone at the contractor’s expense.
- Pricing hanging over existing paint without primer and fine filler, although thin wallpaper shows every defect beneath it.
Related calculators and terms
More items in Decorative finishes
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل