Steel gate in the bill of quantities
| Unit | No. (or m²) |
|---|---|
| Category | Gates and metal fences |
| Division | Metal and steel works |
The item as worded in the bill
Supply, fabricate and install main sliding steel gate, size 500×250 cm, of 80×40 mm rectangular hollow-section frame 2 mm thick, clad with 1.5 mm steel sheet with laser-cut patterns, including ground track, rollers, guide post, stoppers and lock, electric motor with toothed rack, two remote controls and safety sensors, and painting.
Method of measurement
Measured by number with the overall size and opening system stated. Where given by square metre, the leaf face area is taken, width by height, excluding the extra length behind the wall in a sliding gate unless the bill states otherwise. The pedestrian gate is counted separately by number. The motor is part of the item if mentioned in the description, and the track is not measured.
What the unit rate covers
- Gate frame and cladding
- Hinges or track and rollers
- Guide posts and stoppers
- Lock and handles
- Primer and final paint
- Motor and controls where given in the description
Priced separately
- Concrete track beam and gate piers
- Power feed to the motor
- Video intercom system
- Stone cladding of the piers
Specification and reference
It is governed by the detail drawings and project specification for sections, thicknesses, welding and paint system or galvanising. A solid gate is checked for wind loads under SBC 301, motor connections are made to SBC 401 with the safety devices in the manufacturer’s data sheet, and the gate must not open beyond the property line, as municipalities require.
What moves the rate
- Size and weight
- Cladding type: sheet, laser-cut or wrought ironwork
- Opening system: hinged or sliding
- Motor and finish type
Common pricing mistakes
- Forgetting that a sliding gate leaf is longer than the opening and needs clear space beside the wall to run back.
- Dropping the concrete track beam and its drainage on the assumption that it is part of the paving works.
- Choosing a motor too weak for the weight of a solid sheet-clad gate, so it fails in the first months.
- Pricing the main gate at the square-metre rate of a light pedestrian gate, despite a large difference in sections and weight.
More items in Gates and metal fences
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل