Steel staircase in the bill of quantities
| Unit | tonne (or No. for a complete stair) |
|---|---|
| Category | Handrails and metal stairs |
| Division | Metal and steel works |
The item as worded in the bill
Supply, fabricate and install straight steel stair 100 cm wide, of two UPN 200 channel stringers, treads of 5 mm chequered plate folded and stiffened with angles, an intermediate landing and tube handrail both sides, fixed with base plates and anchor bolts, including blast cleaning, one coat of epoxy primer and two finishing coats.
Method of measurement
Measured by tonne on the net weight from the approved shop drawings, including stringers, treads, landings, brackets and plates. The handrail is weighed with the stair if the description says so; otherwise it is measured by linear metre. Nothing is added for welds, bolts or cutting waste. Where measured by number, the stair is counted complete from floor to floor with the total rise stated.
What the unit rate covers
- Shop drawings
- Supply of sections and plates, fabrication and welding
- Surface preparation and painting or galvanising
- Base plates and anchor bolts
- Transport and erection
- Handrail where the description says so
Priced separately
- Concrete base at the foot of the stair
- Handrail where separately itemised
- Fire-resistant coating
- Covering treads with tiles or rubber
Specification and reference
It is designed and executed to SBC 306; its dimensions are subject to SBC 201 requirements for exit stairs regarding width, riser height, tread depth, landings and headroom, and live loads are taken from SBC 301. Steel is of a grade such as ASTM A36, and welding is carried out by qualified welders.
What moves the rate
- Total rise and width
- Stair type: straight, dog-leg or spiral
- Tread type: chequered plate, grating or concrete-filled
- Finish: paint or galvanising for external stairs
Common pricing mistakes
- Pricing by number without checking storey height; a few more risers change the weight and may require an extra landing.
- Forgetting landing support posts and the fixing brackets at the slab edge in the weight calculated for the stair.
- Treating an external emergency stair as an internal one, although it needs hot-dip galvanising and non-slip treads.
- Weighing the stair without the handrail and toe plates although the description includes them in the item.
Related calculators and terms
More items in Handrails and metal stairs
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل