العربية Try the demo Start now
Home › BOQ items guide › Metal and steel works › Gates and metal fences › Chain-link fence

Chain-link fence in the bill of quantities

Unitlin. m
CategoryGates and metal fences
DivisionMetal and steel works

The item as worded in the bill

Supply and install chain-link fence 2 m high, of 3 mm galvanised wire with 50×50 mm mesh, on 60 mm diameter galvanised tube posts every 3 m set in 40×40×60 cm concrete footings, with strain posts and raking braces at corners and ends and three horizontal tension wires, including excavation, concrete and all fixing accessories.

Method of measurement

Measured by linear metre along the fence centreline at ground level between end posts, following the ground slope, with the height stated in the description. Gate openings are deducted and gates counted by number. Nothing is added for posts, braces, footings or overlaps of mesh rolls. Barbed wire arms and strands are part of the item if mentioned in the description.

What the unit rate covers

Priced separately

Specification and reference

It is governed by the project specification and the manufacturer’s data sheet for wire diameter, mesh size, zinc coating weight or plastic coating, post diameter and wall thickness, and footing size. Where the fence is covered with fabric, posts and footings are checked for wind loads under SBC 301 and for the site soil under SBC 303.

What moves the rate

Common pricing mistakes

More items in Gates and metal fences

Price your whole bill of quantities

Upload the bill of quantities and its items are priced from published references, each with its price source.

Start nowجرّب بلا تسجيل