Gates and metal fences in the bill of quantities
The category covers vehicle and pedestrian gates and metal fences. A gate is made of a steel hollow-section frame clad with sheet, laser-cut patterns or wrought ironwork, with hinged leaves or sliding on a track, manual or motorised. Metal fences come in several kinds: chain-link mesh on galvanised posts, welded mesh panels, and steel railings on top of walls. Chain-link is chosen for enclosing plots, sites, sports courts and utilities for its economy and speed of execution, and ornamental steel for villas and buildings where appearance matters.
Where it sits in the bill and what comes before it on site
They appear in the external works or metalwork section. They are executed after the boundary wall and gate piers are complete and paving levels known; post footings and the track beam of a sliding gate are cast before final paving.
Items in this category
| Item | Unit |
|---|---|
| Steel gate | No. (or m²) |
| Chain-link fence | lin. m |
What is often left out when pricing it
- Excavation and concrete for post footings, which usually have no separate item.
- The sliding gate track, its concrete beam, rollers, guide posts and stoppers at both ends of travel.
- The motor, safety sensors, controls and the power feed up to the gate position.
- Strain and brace posts at corners and ends and tension wires in chain-link fencing.
Frequently asked questions
Is a gate measured by number, by square metre or by weight?
Mostly by number with size and opening system stated, and sometimes by square metre of leaf face or by kilogram. Each method gives a different unit rate, so the gate weight is first calculated from the details, then converted to the bill’s unit; a square-metre rate is not borrowed from a differently designed project.
Are fence post footings included in the rate per linear metre?
They are included where the description says the rate covers excavation and concrete footings, the usual case. If it is silent and footings have no separate item, they are carried in the rate per linear metre, as the fence cannot be built without them. Corner and gate post footings are larger than ordinary ones.
How is chain-link fencing measured?
Measured by linear metre along the fence centreline following the ground slope, with the height stated in the description. Gate openings are deducted and gates counted by number. Posts, braces and mesh overlaps are not measured separately. Where the height changes over part of the fence, that part is kept in a separate item.
Other categories in Metal and steel works
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل