Stainless steel handrail in the bill of quantities
| Unit | lin. m |
|---|---|
| Category | Handrails and metal stairs |
| Division | Metal and steel works |
The item as worded in the bill
Supply and install handrail of grade 304 stainless steel in satin finish, 100 cm high, of 50 mm diameter tube posts 1.5 mm thick, 50 mm diameter top rail and 16 mm diameter horizontal intermediate tubes in the number and spacing detailed, fixed with round base plates and cover flanges, including argon welding, polishing and removing weld marks.
Method of measurement
The length is taken on the top rail axis in linear metres, slopes and landings included. Elbows, end caps and wall returns are not measured separately and are carried in the rate. Grade, diameter, thickness and finish are stated in the description, and any change in them is a separate item. It is not measured by weight, and glass panels between posts, if any, have their own item.
What the unit rate covers
- Tubes and fittings of the specified grade
- Argon welding, grinding and polishing
- Base plates, bolts and cover flanges
- Installation and alignment
- Cleaning and treating weld areas
- Protective wrapping until handover
Priced separately
- Glass panels between posts
- Timber top rail
- Lighting built into the handrail
Specification and reference
It is subject to SBC 201 requirements for height and openings and to SBC 301 loads. The project specification defines the stainless steel grade, 304 for interior locations and 316 for coastal areas and swimming pools, with tube wall thickness and finish, satin or mirror, and requires fixings of stainless steel, not ordinary steel.
What moves the rate
- Stainless steel grade: 304 or 316
- Tube diameter and wall thickness
- Finish: satin or mirror
- Number of intermediate tubes and curved parts
Common pricing mistakes
- Pricing grade 304 or lower where the specification requires 316 for a seafront or pool, so rust spots appear quickly.
- Comparing rates per linear metre without fixing the tube wall thickness, the first thing a fabricator reduces to lower the rate.
- Forgetting elbows, end caps, brackets and cover flanges, which are numerous on stairs with many turns.
- Using ordinary steel fixings or cutting tools contaminated with iron, which transfers rust spots to the stainless surface.
More items in Handrails and metal stairs
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل