Glass balustrade in the bill of quantities
| Unit | lin. m (or m²) |
|---|---|
| Category | Handrails and metal stairs |
| Division | Metal and steel works |
The item as worded in the bill
Supply and install frameless glass balustrade 110 cm high, of 10+10 mm tempered laminated glass with interlayer and polished edges, fixed in an aluminium base channel anchored to the concrete slab with chemical anchors, with stainless steel top rail, including rubber gaskets, channel cover and structural calculations.
Method of measurement
Measured by linear metre along the base channel, and on the sloping length on stairs, with the height stated. Where measurement is by square metre, the area of glass exposed above finished level is taken, excluding the part embedded in the channel. Raked stair panels are measured at their actual area even though cut from rectangular sheets, and gaps between panels are not deducted.
What the unit rate covers
- Glass panels cut, polished, tempered and laminated
- Base channel or point fixings
- Chemical anchors
- Rubber gaskets and channel cover
- Top rail where given in the description
- Structural calculations and installation
Priced separately
- Repairing waterproofing at the balcony edge
- Stone or marble cladding of the upstand
- Built-in lighting
Specification and reference
SBC 201 requires safety glass for guards, normally tempered laminated glass, and sets the guard height, and SBC 301 sets the horizontal loads on it. Glass thickness, interlayer type and anchor spacing are determined by approved structural calculations, and the project specification defines the fixing type and edge polishing.
What moves the rate
- Glass thickness and interlayer type
- Fixing system: continuous channel or point fixings
- Height and design load
- Straight, curved or raked stair panels
Common pricing mistakes
- Pricing single tempered glass while guards require laminated glass, with a large difference between the two.
- Ordering glass for the exposed height only and forgetting the depth embedded inside the base channel.
- Overlooking that stair panels are trapezoids cut from rectangles, which raises waste and needs a template for each panel.
- Fixing the channel on the screed or tiles rather than the concrete slab, so anchors do not reach their required depth.
Related calculators and terms
More items in Handrails and metal stairs
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل