Handrails and metal stairs in the bill of quantities
The category covers guards and handrails for stairs, balconies and roofs, and steel staircases. A handrail is made of painted steel, plain or ornamental, of stainless steel, grade 304 for interiors and 316 for coastal areas and pools, or of tempered laminated glass fixed in a base channel or on point fixings. Steel stairs have side stringers with chequered plate or grating treads. Steel is chosen for economy, stainless steel and glass for appearance in commercial buildings and villas, and the steel stair for emergencies, service rooms and mezzanines.
Where it sits in the bill and what comes before it on site
They appear in the metalwork section and are mostly measured by linear metre. They are installed after stairs are clad with marble or tiles, with the fixing method decided beforehand; embedded parts or glass base channels are fixed before waterproofing and finishes.
Items in this category
| Item | Unit |
|---|---|
| Steel handrail | lin. m |
| Stainless steel handrail | lin. m |
| Glass balustrade | lin. m (or m²) |
| Steel staircase | tonne (or No. for a complete stair) |
What is often left out when pricing it
- Base plates, anchors, drilling through marble and decorative cover flanges for every post.
- The wall handrail on the opposite side of the stair where the code or drawings require it.
- Bends and joints at landings, handrail ends and their returns to the wall at every floor.
- Grinding and polishing welds on site and touching up paint or surface after installation.
Frequently asked questions
Is a handrail measured on the sloping length or on plan?
It is measured by linear metre along the centreline of the top rail following the slope of the flights, plus the length of landings and returns. Posts and embedded parts are not measured separately, and the height is stated in the description. Measuring on plan clearly understates the quantity on steep stairs.
What decides the handrail height and the spacing of its bars?
SBC 201 sets the minimum height of guards and handrails and the maximum openings between bars, and SBC 301 sets the loads they must carry. The contractor prices what the drawings show; if the height or openings appear not to meet the code, a query is raised before pricing because the change alters the weight.
When is grade 316 stainless steel required instead of 304?
It is required in coastal cities, around swimming pools and in places exposed to salts and chlorine, because grade 304 shows surface rust spots in such atmospheres. Grade 316 costs more, so the specification is checked for the grade required at each location, and the whole project is not priced on the cheaper grade.
Related calculators and terms
Other categories in Metal and steel works
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل