Shades and screens in the bill of quantities
The category covers car shades and privacy screens. A shade is a steel structure, cantilevered, four-post or arched, covered with air-permeable knitted polyethylene fabric, rainproof tensioned PVC fabric, metal sheet or polycarbonate panels. A screen is a privacy barrier raised on top of a boundary wall or built free-standing, of a steel frame clad with corrugated sheet, fabric, laser-cut panels or wood-plastic composite slats. The choice is governed by the degree of shade and rain protection required, appearance and the municipality’s requirements for screen height.
Where it sits in the bill and what comes before it on site
They appear in the external works or metalwork section. Shade column footings are cast before final paving, and screens are installed after the wall is complete and its capacity to carry them verified, with municipality requirements checked before fabrication.
Items in this category
| Item | Unit |
|---|---|
| Car parking shades | m² (or per parking bay) |
| Privacy screens | m² (or lin. m with height stated) |
What is often left out when pricing it
- Excavation and concrete for column footings and anchor bolts, which are large in cantilever shades.
- Structural calculations for wind loads and the fabric warranty against ultraviolet radiation for a stated period.
- Reinstating paving or interlock around the footings after excavation in finished car parks.
- Chemical anchors and fixing plates where screen posts are tied to the columns of an existing wall.
Frequently asked questions
Is a car shade measured by square metre or per parking bay?
Mostly by square metre on the horizontal projection of the covered area, not on the developed fabric surface. Some bills measure it per parking bay with the bay size stated. Suppliers’ offers are sometimes based on fabric area, so the estimator unifies the basis before comparing an offer with the bill quantity.
How is a privacy screen measured?
By square metre, length by exposed height above the wall, or by linear metre with the height stated. The post length running down beside the wall for fixing is not measured. Where the wall top is stepped, each part is measured at its actual height; one height is not applied to the whole length.
How do shade fabric types differ in pricing?
Knitted polyethylene fabric is economical, gives shade and lets air through but does not stop rain. Tensioned PVC fabric is waterproof, lasts longer and needs a stronger structure because it takes the full wind load. The type in the specification is priced with its weight and warranty period, not replaced by the cheaper one.
Related calculators and terms
Other categories in Metal and steel works
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل