Covers and gratings in the bill of quantities
The category covers manhole covers with their frames and drainage gratings. Covers are made of ductile cast iron in load classes ranging from pedestrian areas to roads, or of composite materials, or are recessed and filled with tiles inside buildings and courtyards. Gratings are of galvanised steel for linear drainage channels and trench covers, or of cast iron for stormwater gullies. The choice is governed first by the traffic load over the cover, then by its sealing against odours and its locking, then by its appearance in paved areas.
Where it sits in the bill and what comes before it on site
They appear with drainage and external works items, and sometimes under metalwork. The chamber or channel is built first; the frame and cover are then set at final level together with the last paving or asphalt layer.
Items in this category
| Item | Unit |
|---|---|
| Manhole covers and drainage gratings | No. (lin. m for channel gratings) |
What is often left out when pricing it
- Bedding mortar for the frame, the concrete surround and setting it to the final paving level.
- The correct load class for areas crossed by cars, trucks and service vehicles.
- The lock, hinge, odour-sealing ring and the utility name cast on the cover.
- Steel angle frames for trench gratings and fixing them in the concrete before the final pour.
Frequently asked questions
Is the cover measured separately from the manhole?
It follows the bill wording. Many manhole items state that the chamber is complete with cover and frame, so the cover is not priced again. Where the cover has a separate item, it is measured by number with the clear opening, shape and load class stated, and priced with its frame and bedding.
How are drainage gratings measured?
Linear channel gratings are measured by linear metre with width and load class stated, wide floor gratings by square metre, and single stormwater gullies by number. The grating frame and its fixing are in the rate. The estimator checks whether the channel is part of the item or has its own item under drainage works.
How is the load class chosen?
Taken from the drawings and specification by location under the EN 124 classification: a light class for pedestrian areas, a medium one for footways and car parks, a heavy one for carriageways. The rate difference between classes is large, and a lighter class than required means a broken cover replaced at the contractor’s cost.
Related calculators and terms
Other categories in Metal and steel works
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل