CCTV system in the bill of quantities
| Unit | No. for cameras and equipment (or lump sum) |
|---|---|
| Category | Earthing and low-current systems |
| Division | Electrical works |
The item as worded in the bill
Supply, install and program an IP video surveillance system comprising indoor dome cameras and outdoor bullet cameras of 4-megapixel resolution with infrared night vision, a network video recorder with hard disks sufficient for the required retention period, switches powering the cameras over the network cable, and a display monitor; the rate includes cables, brackets, set-up and training.
Method of measurement
Cameras are measured by number for each type (dome, bullet, pan-tilt-zoom, number plate recognition); recorders, switches and monitors by number; cables in linear metres from each camera to the nearest switch, not always to the control room. The recorder item states channels and storage capacity. Dedicated poles for outdoor cameras and their foundations are measured by number. Programming and licences are included in the equipment or a lump sum item.
What the unit rate covers
- Cameras with brackets and junction boxes
- Network video recorder and hard disks
- Power-over-Ethernet switches
- Network cables and their terminations
- Display monitor, management software and its licences
- Setting camera views and training
Priced separately
- Conduits and containment where part of the conduit works
- Uninterruptible power unit and equipment rack unless stated
- Outdoor camera poles and their foundations
Specification and reference
The system is subject to the Law on the Use of Security Surveillance Cameras and its implementing regulations, which define the premises obliged, prohibited positions and the retention period for recordings, and to the project specification for resolution, frame rate and outdoor protection degree. Cabling follows structured cabling rules, keeping each copper link within the permitted length.
What moves the rate
- Number, resolution and type of cameras
- Recording retention period and storage capacity
- Distances between cameras and switches
- Level of management software and analytics required
Common pricing mistakes
- Pricing hard disks too small for the statutory retention period at the given camera count and resolution, so the system fails inspection.
- Ignoring that a camera farther from the switch than the copper cable limit needs an intermediate switch or optical fibre.
- Forgetting channel licences in the management software, sold per camera in medium and large systems.
- Allowing an ordinary switch instead of a powered one, or one whose total power budget cannot serve pan-tilt-zoom cameras and strong infrared illuminators.
Related calculators and terms
More items in Earthing and low-current systems
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل