Water closets in the bill of quantities
| Unit | No. |
|---|---|
| Category | Sanitary fixtures |
| Division | Plumbing and drainage |
The item as worded in the bill
Supply and install a western-type water closet in white glazed vitreous china, first grade, with a dual-flush cistern and a soft-close seat and cover; the rate includes the angle valve and flexible connector, the pan connector and sealing ring, fixing with screws and silicone, a hand bidet spray with its hose and valve, testing and handing over ready for use.
Method of measurement
Measured by number, each type separately: floor-standing western, wall-hung with concealed cistern, eastern (squatting) and accessible. The set is counted complete with the cistern, seat and bidet spray named in the description. The carrier frame and concealed cistern of a wall-hung closet are included in the count where the description names them; otherwise an item should be requested. The supply and drainage points are not measured under this item.
What the unit rate covers
- Pan, cistern and flushing mechanism
- Seat and cover
- Angle valve and flexible connector for the cistern
- Pan connector, sealing ring and fixing
- Hand bidet spray where described
Priced separately
- Supply and drainage points within wall and floor
- Carrier frame for a wall-hung closet unless described
- Grab bars for accessible toilets
Specification and reference
Installation is governed by SBC 701, which sets side and front clearances around the closet and the number of fixtures by occupancy; flush volume follows the water-saving requirements of the Saudi Standards, Metrology and Quality Organization. Pieces are of flawless glazed vitreous china, and the accessibility provisions of SBC 201 apply in toilets for persons with disabilities.
What moves the rate
- Floor-standing or wall-hung with concealed cistern
- Origin and grade of selection
- Seat type and flushing mechanism
- Quantity and standardising one model across the project
Common pricing mistakes
- Pricing a wall-hung closet at the price of the china piece only and forgetting the carrier frame, concealed cistern and flush plate.
- Buying a floor-outlet pan when pipework was laid for a wall outlet or the reverse, or with a set-out that does not suit the model.
- Omitting the bidet spray and its separate valve, which is expected in every toilet in the Kingdom even where the description is silent.
- Not allowing for breakage in transport and storage, so extra pieces are ordered in a shade or batch that does not match the first.
Related calculators and terms
More items in Sanitary fixtures
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل