Aluminium composite panel cladding in the bill of quantities
| Unit | m² |
|---|---|
| Category | Glazed facades and metal cladding |
| Division | Doors, windows and aluminium |
The item as worded in the bill
Supply and install facade cladding of 4 mm aluminium composite panels with two 0.5 mm aluminium skins and fire-resistant core, PVDF coated, formed as cassettes and fixed on a carrier frame of aluminium sections with galvanised brackets, including joints, sealant, opening corners and flashings as per the approved drawings.
Method of measurement
Measured by square metre on the exposed surface executed. The preambles state whether opening returns, parapet copings and soffits are measured on their developed surface or deemed included in the rate. Window and door openings are deducted. Folded cassette edges and cutting waste from standard sheet sizes are not measured, and the carrier frame is not measured separately.
What the unit rate covers
- Panels with routing, folding and forming
- Carrier frame, brackets and anchors
- Joints with sealant and backer rod
- Flashings, corners and edge trims
- Shop drawings
- Removing the protective film and cleaning
Priced separately
- Thermal insulation and waterproofing behind the cladding where separately itemised
- Signboards and lighting
- Steel structure for projections and canopies
Specification and reference
It is subject to SBC 201 and SBC 801 requirements for combustible exterior claddings and to Civil Defense approval, and fire test reports are required for the panel and the complete system. The carrier frame and anchors are designed for wind loads under SBC 301, and the project specification defines coating type, thickness and warranty period.
What moves the rate
- Panel core type and its fire performance
- Coating type and colour
- Module size and curved shapes
- Carrier frame depth and facade height
Common pricing mistakes
- Pricing panels with an ordinary plastic core, which are rejected for facades, then bearing the difference for the fire-resistant panel after award.
- Taking panel quantity from the elevation area without the folded cassette edges and module waste from the standard sheet width.
- Pricing a light carrier frame for uneven block walls that need longer brackets and more sections.
- Forgetting window returns, parapet copings and soffits because they do not show on the elevation drawing.
Related calculators and terms
More items in Glazed facades and metal cladding
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل