Fire sprinkler system in the bill of quantities
| Unit | No. (heads) and lin. m (pipes) |
|---|---|
| Category | Fire fighting |
| Division | HVAC and fire fighting |
The item as worded in the bill
Supply and install automatic pendent quick-response fire sprinkler head, K-factor 5.6, temperature rating 68 °C, complete with escutcheon plate, listed and approved for fire service; the rate includes connection to the branch line and inclusion in the network pressure test; black steel pipes and valves are measured under their own items.
Method of measurement
Sprinkler heads are measured by number, classified by type (pendent, upright, sidewall, concealed) and temperature rating. Pipes are measured in linear metres per diameter along the centre line without deducting fittings; elbows, tees and hangers are carried in the pipe rate. Zone control valves, alarm valves and flow switches are measured by number. Quantities come from approved shop drawings, not preliminary tender drawings.
What the unit rate covers
- Sprinkler head and escutcheon plate
- Drop nipple or flexible hose where the item states it
- Sealing materials for threaded joints
- Coordinating head positions with the suspended ceiling tiles
- Hydrostatic pressure test and flushing of the network
- Spare head cabinet with its wrench
Priced separately
- Pump set and fire water tank
- Fire alarm system and wiring of flow switches to it
- Fees for preparing drawings and Civil Defense approval
- Fire-stopping of penetrations
Specification and reference
Governed by the fire code SBC 801 and the general building code SBC 201 on which buildings require sprinklers; the system is designed and installed to NFPA 13 for hazard classification, head spacing and hydraulic calculations. Pipes are black steel to ASTM A53 or equivalent, the network is hydrostatically tested, and Civil Defense approves drawings and materials before installation.
What moves the rate
- Head type (exposed or concealed) and response rating
- Hazard classification and the spacing and diameters it leads to
- Ceiling height and presence of a suspended ceiling
- Pipe jointing method (threaded or grooved) and quantity
Common pricing mistakes
- Counting heads from the architectural ceiling plan only and missing upright heads above the suspended ceiling where required, and in service rooms and stores.
- Pricing exposed pendent heads while the architect requires concealed heads with cover plates; the price difference between the two is clear.
- Leaving out zone control valves, flow switches and test and drain lines on each floor when pricing per point.
- Assuming small diameters for the whole network before hydraulic calculations, so the mains grow when the drawings are approved.
Related calculators and terms
More items in Fire fighting
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل