Wooden doors in the bill of quantities
Wooden doors comprise internal room doors, the main entrance door and doors for wet areas. The leaf is made either of natural solid timber, or of a timber framework with a solid or hollow core faced with MDF boards and finished in natural veneer, laminate or paint, or of water-resistant wood-plastic composite. Solid timber is chosen for entrances and high-end doors, faced doors for repetitive housing projects for their consistent quality and quick supply, and the composite for bathrooms and kitchens where ordinary timber is damaged by moisture.
Where it sits in the bill and what comes before it on site
Their items sit in the joinery section of the bill of quantities, ordered by door schedule codes. Before installation, openings and lintels must be built, plastering finished and the finished floor level known, with wet trades complete before leaves are hung.
Items in this category
| Item | Unit |
|---|---|
| Internal wooden door | No. |
| Main entrance door | No. |
| Water-resistant composite doors for wet areas | No. |
What is often left out when pricing it
- The frame width where wall thickness with plaster and tiles exceeds the standard frame size.
- Architraves on both sides and extension pieces around the frame in thick walls and at tight corners.
- Protecting doors after installation until handover, repairing scratches and applying the final coat on site.
- The sample door and samples to be approved before fabrication starts, plus door stops and thresholds.
Frequently asked questions
Is a wooden door measured by number or by square metre?
Most Saudi bills of quantities measure it by number for each type and size in the door schedule, with frame, leaf and architraves counted as one unit. Some government bills measure it by square metre of the opening, so read the preambles before pricing because the measurement method changes the unit rate.
Does the door rate include ironmongery?
It follows the item wording. If the description says the door is complete with ironmongery, hinges, lock and handle are inside the rate; if the bill has a separate ironmongery section, the door is priced with hinges only or without them as worded. The common error is pricing ironmongery twice or dropping it from both.
How does wall thickness affect the door rate?
The frame is made to the finished wall width, so a frame for a 20 cm block wall with plaster and tiles is much wider than for a 10 cm partition and uses more timber. Wall thickness for each door is taken from the architectural drawings; one size is not assumed for all frames.
Related calculators and terms
Other categories in Doors, windows and aluminium
Price your whole bill of quantities
Upload the bill of quantities and its items are priced from published references, each with its price source.
Start nowجرّب بلا تسجيل